Vacuum lifter for handling sheet metal, metal and wood
Internal handling is the scope of application, where
- the variation range of the loads to be lifted,
- the surface structure and the dimensions,
- the requirements of the necessary positioning facilities and
- the type of available energy sources,
The requirements regarding the engineering design of the devices of the product range OKTOPUS® GL-I result from these variations as well as from other (e.g. safety related) aspects.
Click on the menu on the left to get detailed information on single devices of your scope of application.
Sheet metal / Metal / Wood
Safety features
- Compliance with all criteria of DIN EN 13155
- Devices for internal handling of glass according DIN EN 13035
- CE mark according to Machinery Directive 2006/42/EG
- Devices with dual-circuit vacuum systems for construction site use
- Each vacuum circuit with 2-fold safety
- Integrated vacuum gauges
- Optical and/or acoustic warning devices signaling deviations from the nominal condition
- Pressure controlled vacuum to reduce the consumption of energy and compressed air
- Integrated pressure switch control to indicate malfunctions
- Construction site devices with 24 V battery systems with considerably increased safety compared to 12 V systems
- Battery devices with built-in battery level indicator
- Vacuum reservoir to compensate vacuum loss
- Energy-self-sufficient indicator to signal breakdown of energy supply
Legend
Crane attachment
Fork lift attachment
Handling horizontally
Handling vertically
Rotate 360°
Rotate +/- 90°
Rotate 90°/95°
Turn-over ≥ 180°
Turn-over 0 - 96°/98°
Tilt around horizontal axis
Incline 82°/84° - 90°
Control panel at the device / cable remote control
Radio remote control
Manual operation
Mains current
Battery
Compressed air
Brehnaer Straße 1 | D-06188 Landsberg
info[at]wirth-gmbh.com
+49 (0) 34 602 / 70 88-0
+49 (0) 34 602 / 70 88-111