Vacuum lifter for installation of sandwich elements
Compared to conventional installation all vacuum-supported OKTOPUS® installation systems have the following advantages:
- installing sandwich elements is more economic due to shorter duration of installation and rationalization of the construction process
- relieving the installer from heavy physical lifting works
- improving work safety during installation
- economization of additional auxiliary means
- material friendly installation
- interchangeable suction pads for all common elements including many different shapes of corrugated sheets
Installation of sandwich elements
Safety features
- Compliance with all criteria of DIN EN 13155
- Devices for internal handling of glass according DIN EN 13035
- CE mark according to Machinery Directive 2006/42/EG
- Devices with dual-circuit vacuum systems for construction site use
- Each vacuum circuit with 2-fold safety
- Integrated vacuum gauges
- Optical and/or acoustic warning devices signaling deviations from the nominal condition
- Pressure controlled vacuum to reduce the consumption of energy and compressed air
- Integrated pressure switch control to indicate malfunctions
- Construction site devices with 24 V battery systems with considerably increased safety compared to 12 V systems
- Battery devices with built-in battery level indicator
- Vacuum reservoir to compensate vacuum loss
- Energy-self-sufficient indicator to signal breakdown of energy supply
Legend
Crane attachment
Fork lift attachment
Vertical wall installation
Horizontal wall installation
Roof installation
Overhead installation
Rotate 360°
Tilt around horizontal axis
Turn-over ≥ 180°
Tilt around vertical axis (swivel)
Side stroke
Teleskop. Ausleger/ Kranarm/Hubsäule
Control panel at the device / cable remote control
Radio remote control
Manual operation
Battery
Brehnaer Straße 1 | D-06188 Landsberg
info[at]wirth-gmbh.com
+49 (0) 34 602 / 70 88-0
+49 (0) 34 602 / 70 88-111