Manipulator for handling large-sized sandwich elements
Dual circuit system
- 2 independent vacuum circuits, each vacuum circuit with 2-fold safety and integrated reserve vacuum
- for construction site use according to DIN EN 13155
- Handling flat construction elements on construction sites
- forklift / telescopic forklift
- quick change system Maniton, Herkules, Merlo
- fork sleeves for transport
The vacuum based load lifting attachment OKTOPUS® IT-BT 850 is designed for handling large-sized construction elements with a maximum weight of up to 800 kg on construction sites. Each function is controlled via remote control (optional radio remote control). The necessary negative pressure in the suction pads is generated by a vacuum pump which is operated with 24 V DC.
Optical and acoustic signaling devices indicate deviations from the nominal condition. Even in case of complete breakdown of energy supply the vacuum will remain in each suction pad for at least 5 minutes. In this way it is ensured that the load can be securely lowered at all times.
Material to be handled
The OKTOPUS® IT-BT 850 is suitable for handling sandwich elements. The suction areas of the elements to be lifted have to be air-impermeable, have to have an even and clean surface and must not be covered with protective film.
Device / suction pads Working Load Limit 12 round suction pads ∅ 250 mm max 400 kg 16 round suction pads ∅ 250 mm max 530 kg 24 round suction pads ∅ 250 mm max 800 kg
Weight: approx. 750 kg (12 round suction pads without extension)
approx. 970 kg (24 round suction pads with extension)
Power supply: 24 V Battery Nominal pressure pneumatic system: -0,65 bar bis -0,73 bar Vacuum supply: vacuum pump Operation: cable remote control Options: radio remote control Movements (electric) telescopic: forwards / backwards 200 mm side shift: left / right 200 mm turn-over: 180° rotate: 360°
Use of OKTOPUS® IT-BT 850
sandwich it-bt 850