Manipulator for handling large-sized construction elements
Dual circuit system
- 2 independent vacuum circuits, each vacuum circuit with 2-fold safety and integrated reserve vacuum
- for construction site use according to DIN EN 13155
- Handling flat construction elements on construction sites
- forklift / telescopic forklift
- quick change system Maniton, Herkules, Merlo
- fork sleeves for transport
The vacuum based load lifting attachment OKTOPUS® IT-BT 1000 is designed for handling construction site elements with a maximum weight of 1000 kg on construction sites. Each function is controlled via remote control (optional radio remote control). The necessary negative pressure in the suction pads is generated by a vacuum pump which is operated with 24 V DC.
Optical and acoustic signaling devices indicate deviations from the nominal condition. Even in case of complete breakdown of energy supply the vacuum will remain in each suction pad for at least 5 minutes. In this way it is ensured that the load can be securely lowered at all times.
Material to be handled
The OKTOPUS® IT-BT 1000 is suitable for handling sandwich elements. The suction areas of the elements to be lifted have to be air-impermeable, have to have an even and clean surface and must not be covered with protective film.
Device / suction pads Working Load Limit 30 round suction pads ∅ 250 mm max 1000 kg
Weight: approx. 1230 kg Power supply: 24 V Battery Nominal pressure pneumatic system: -0,65 bar bis -0,73 bar Vacuum supply: vacuum pump Operation: radio remote control Options: cable remote control Movements (electric) telescopic: forwards / backwards 200 mm side shift: left / right 200 mm turn-over: 180° rotate: 360°
Use of OKTOPUS® IT-BT 1000
sandwich it-bt 1000