OKTOPUS® GLASS-Jack GL-N 400/300

Vacuum lifting device for construction site use with manual rotating and tilting function

Dual-circuit system

2 independent vacuum circuits, each vacuum circuit with 2-fold safety and integrated vacuum reservoir
for construction site use according to DIN EN 13155

Use

Handling flat glass panes and window elements on construction sites. The suction areas of the elements to be lifted must be air-impermeable, have to have an even and clean surface and must not be covered with protective film.

Hoist

truck-mounted crane, mini crane

Fastening

at the crane hook

Description

The very low construction height of the OKTOPUS® GLASS-Jack GL-N 400/300 of just 190 mm allows the installation of glass and façade elements in the usually only 30 cm wide clearances between building facades and the scaffolding in front of it. Extension arms allow handling elements up to a maximum weight of 400 kg (horizontal) and 300 kg (vertical). The optional available blow-off function allows and quickens the release of suctioned glass panes.

Deviations from the nominal condition are indicated by optical and acoustical warning devices. Even in the case of complete energy breakdown vacuum remains in each suction pad for at least 5 minutes. In this way a secure lowering of the load can be ensured at all times.

Working Load Limit

Device / Suction pads maximum Working Load Limit

4 suction pads Ø 300 mm horizontal up to 400 kg
vertical up to 300 kg

Application data

Weight	Depending on the configuration approx. 35 - 45 kg
Suction pads	4 pcs. Ø 300 mm
Vacuum generation	electrical vacuum pump
Operation	operating lever on the device
Vacuum system	dual-circuit vacuum system for construction site use
Nominal pressure pneumatic system	-0.65 bar to -0.73 bar
Power supply	24 V DC battery system
Optional facilities	blow-off function
Optional equipment	transport box
Movements
Lifting and lowering	by the crane hook
Rotating horizontally	in the crane hook, manually 360°
Rotation of the suction frame	manually 360°, lockable every 45°
Tilting the suction frame	manually, 0-90°