Phone: +49 (0) 34 602 / 70 88 - 0

Vacuum lifting device for construction site use with manual rotating and tilting function

Dual-circuit system

  • 2 independent vacuum circuits, each vacuum circuit with 2-fold safety and integrated vacuum reservoir
  • for construction site use according to DIN EN 13155


Handling flat glass and window elements. The suction areas of elements to be lifted must be air-impermeable, have to have an even and clean surface and must not be covered with protective film.




  • at the crane hook

Material to be handled

  • flat glass panes and window elements


The vacuum based load lifting attachment OKTOPUS® GLASS-Jack GL-KPN 1400 is designed to handle large-sized glass panes and window elements with a maximum weight of up to 1400 kg on construction sites. It is equipped with a dual-circuit vacuum system for construction site use according to DIN EN 13155. The crane eye of the device allows attaching the device to a hoist (provided by the customer). The suction frame can be rotated manually by 360° and tilted by 90°. The operating and display elements are arranged ergonomically and allow comfortably positioning and moving the load.

The two electrically operated vacuum pumps are supplied with energy by a 24 V DC battery system. Deviations from the nominal condition are indicated by optical and acoustical warning devices. Even in the case of complete energy breakdown vacuum remains in each suction pad for at least 5 minutes. In this way a secure lowering of the load can be ensured at all times.

The lowering cylinder that is optionally available allows a smooth and jerkless lowering of the load. The blow-off function that is optionally available as well eases and quickens the release of the suctioned glass panes.

  • Device / Suction padsmaximum Working Load Limit
    8 suction pads Ø 400 mmup to 800 kg
    14 suction pads Ø 400 mmup to 1,400 kg
  • Weightapprox. 230 kg
    Suction pads14 pcs. Ø 400 mm
    Vacuum generationelectrical vacuum pump
    Operationcable remote control
    Vacuum systemdual-circuit vacuum system for construction site use
    Nominal pressure pneumatic system-0.65 bar to -0.73 bar
    Power supply24 V DC battery system
    Optional facilitiescrane arm with hydraulic lowering cylinder
    - blow-off function
    - radio remote control
    Optional equipmenttransport cart
    Lifting and loweringby the crane hook
    Rotating horizontallyin the crane hook, manually 360°
    Rotating the suction frame360° manually, lockable in 90° grid
    Tilting the suction framemanually 90°, incl. latching function (22,5°)


  • Crane attachment
  • Mini crane manipulator
  • Fork lift attachment
  • For even glass panes
  • For curved glass panes
  • Rotate 360°
  • Rotate 90°/95°
  • Tilt around horizontal axis
  • Tilt around vertical axis (swivel)
  • Telescopic boom/crane arm/lifting column
  • Control panel at the device / cable remote control
  • Radio remote control
  • Manual operation
  • Mains current
  • Battery


Cookies facilitate the provision of our services. By using our services you agree that we use cookies.