Vacuum lifter for construction site use with electrically driven rotating and hydraulic tilting function

Dual-circuit system

• 2 independent vacuum circuits, each vacuum circuit with 2-fold safety and integrated vacuum reservoir
• for construction site use according to DIN EN 13155

Use

Handling flat glass panes and window elements. The suction areas of the loads to be lifted must be air-impermeable, have to have an even and clean surface and must not be covered with protective film.

Hoist

• crane

Fastening

• at the crane hook

Description

The vacuum based load lifting attachment OKTOPUS® GL-M 2000 DES So 530 R E B24 P is designed to handle large-sized glass panes and window elements up to a maximum weight of 2,000 kg. It is equipped with a dual-circuit vacuum system for construction site use according to DIN EN 13155. The crane eye of the device allows attaching the device to an existing hoist provided by the customer. The suction frame can be rotated electrically driven by 360° and hydraulically tilted by 90°.

The suction pads can flexibly be shifted in X and Y direction. The operating and display elements are arranged ergonomically and allow comfortably positioning and moving the load. The electrically operated vacuum pump is supplied with energy by a 24 V DC battery system. Deviations from the nominal condition are indicated by optical and acoustical warning devices. Even in the case of complete energy breakdown, vacuum remains in each suction pad for at least 5 minutes. In this way a secure lowering of the load can be ensured at all times.

The integrated blow-off function allows compressed-air supported and by that a quicker release of the suctioned load.