Manipulator for handling large-sized sandwich elements

Dual circuit system

• 2 independent vacuum circuits, each vacuum circuit with 2-fold safety and integrated reserve vacuum
• for construction site use according to DIN EN 13155

Application

• Handling flat construction elements on construction sites

Hoist

• forklift / telescopic forklift

Fastening

• quick change system Maniton, Herkules, Merlo
• fork sleeves for transport

Description
The vacuum based load lifting attachment OKTOPUS® IT-BT 850 is designed for handling large-sized construction elements with a maximum weight of up to 800 kg on construction sites. Each function is controlled via remote control (optional radio remote control). The necessary negative pressure in the suction pads is generated by a vacuum pump which is operated with 24 V DC.
Optical and acoustic signaling devices indicate deviations from the nominal condition. Even in case of complete breakdown of energy supply the vacuum will remain in each suction pad for at least 5 minutes. In this way it is ensured that the load can be securely lowered at all times.

Material to be handled

The OKTOPUS® IT-BT 850 is suitable for handling sandwich elements. The suction areas of the elements to be lifted have to be air-impermeable, have to have an even and clean surface and must not be covered with protective film.

Datasheet IT-BT 850

Use of OKTOPUS® IT-BT 850

sandwich it-bt 850

• it-bt850_02.jpg

  https://dev.wirth-gmbh.com/images/wirth/vakuum/hebegeraete/artikelbilder/panel-jack/anwendungsbilder/IT-BT850/it-bt850_02.jpg

• it-bt850_03.jpg

  https://dev.wirth-gmbh.com/images/wirth/vakuum/hebegeraete/artikelbilder/panel-jack/anwendungsbilder/IT-BT850/it-bt850_03.jpg

• it-bt850_04.jpg

  https://dev.wirth-gmbh.com/images/wirth/vakuum/hebegeraete/artikelbilder/panel-jack/anwendungsbilder/IT-BT850/it-bt850_04.jpg

• it-bt850_01.jpg

  https://dev.wirth-gmbh.com/images/wirth/vakuum/hebegeraete/artikelbilder/panel-jack/anwendungsbilder/IT-BT850/it-bt850_01.jpg