OKTOPUS® PANEL-Jack IT-BT 500 h

Manipulator for handling large-sized sandwich elements

Dual circuit system

2 independent vacuum circuits, each vacuum circuit with 2-fold safety and integrated reserve vacuum
for construction site use according to DIN EN 13155

Application

Handling flat construction elements on construction sites

Hoist

forklift / telescopic forklift

Fastening

quick change system Maniton, Herkules, Merlo
fork sleeves for transport

Description
The vacuum based load lifting attachment OKTOPUS® IT-BT 500 is designed for handling large-sized construction elements with a maximum weight of up to 500 kg on construction sites. Each function is controlled via remote control (optional radio remote control). The necessary negative pressure in the suction pads is generated by a vacuum pump which is operated with 24 V DC.
Optical and acoustic signaling devices indicate deviations from the nominal condition. Even in case of complete breakdown of energy supply the vacuum will remain in each suction pad for at least 5 minutes. In this way it is ensured that the load can be securely lowered at all times.

Material to be handled
The OKTOPUS® IT-BT 500 is suitable for handling sandwich elements. The suction areas of the elements to be lifted have to be air-impermeable, have to have an even and clean surface and must not be covered with protective film.

Working Load Limit

Device / suction pads	Working Load Limit
8 oval suction pads (100 mm x 320 mm)	130 kg
12 oval suction pads (100 mm x 320 mm)	200 kg
16 oval suction pads (100 mm x 320 mm)	250 kg
8 round suction pads (∅ 250 mm)	250 kg
12 round suction pads (∅ 250 mm)	400 kg
16 round suction pads (∅ 250 mm)	500 kg

Application data

Weight:	approx. 845 kg
Power supply:	24 V battery
Nominal pressure pneumatic system:	-0,65 bar bis -0,73 bar
Vacuum supply:	vacuum pump
Operation:	cable remote control
Options:	radio remote control
Movements (electric)
telescopic:	forwards / backwards 300 mm
side shift:	left / right 200 mm
turn-over:	220°
rotate:	360°
tilt vertically (swivel):	left / right 180°