OKTOPUS® PANEL-Jack GL-E crane attachment
Crane and forklift attachment with integrated hydraulic functions for installing horizontal and vertical wall elements as well as installing short roof elements
Dual circuit system
- 2 independent vacuum circuits, each vacuum circuit with 2-fold safety and integrated reserve vacuum
- for construction site use according DIN EN 13155
Application
- installation of sandwich panels for cold room construction and on industrial construction sites
Hoist
- crane (e.g. truck-mounted crane, top slewing crane)
- forklift (in connection with a forklift adapter)
Suspension
- crane eye
- fork lift adapter
Equipment
- safety belts
- protective caps
Options
- fork lift adapter with built-in side shift
- radio remote control
Special feature
- integrated hydraulic functions (stepless tilt of the suction bridge by 90°, side shift during forklift operation 200 mm)
Material to be handled
Using the tried and tested Wirth round and oval suction pads you can transport and install almost every standard sandwich element and many corrugated sheets with the OKTOPUS® PANEL-Jack GL-E. The suction areas of the elements to be lifted must be air-impermeable, have to have an even and clean surface and must not be covered with protective film.
-
Device / Suction pads Working Load Limit 8 round suction pads (∅ 250 mm) 250 kg 12 round suction pads (∅ 250 mm) 400 kg 8 oval suction pads (100 mm x 320 mm) 130 kg 12 oval suction pads (100 mm x 320 mm) 200 kg 16 oval suction pads (100 mm x 320 mm) 260 kg -
Weight crane attachment approx. 230 kg Weight forklift attachment approx. 400 kg Operation crane control panel on the device Operation fork lift control panel connected to the device via cable,
optional radio remote controlPower supply battery, 24 V Vacuum supply vacuum pump Suction pads Wirth standard suction pads
- round suction pads (∅ 250 mm) or
- oval suction pads (100 mm x 320 mm)Equipment - safety belts
- protective capsOptions - forklift adapter with built-in side shift
- radio remote control
Use of OKTOPUS® PANEL-Jack GL-E
panel-jack gl-e
OKTOPUS-PANEL-Jack_GL-E_02.jpg
OKTOPUS-PANEL-Jack_GL-E_03.jpg
OKTOPUS-PANEL-Jack_GL-E_04.jpg
OKTOPUS-PANEL-Jack_GL-E_05.jpg
OKTOPUS-PANEL-Jack_GL-E_01.jpg