OKTOPUS® GLASS-Jack GL-M7000 cb

Vacuum lifting device for construction site use with hydraulic rotating and tilting function as well as electrically driven movable counterweight balancer

Dual-circuit system

2 independent vacuum circuits, each vacuum circuit with 2-fold safety and integrated vacuum reservoir
for construction site use according to DIN EN 13155

Use

Handling flat glass and window elements as well as long and narrow glass fins. The suction areas of the load to be lifted must be air-impermeable, have to have an even and clean surface and must not be covered with protective foil.

Hoist

truck-mounted crane

Fastening

at the crane hook

Description

The vacuum based load lifting attachment OKTOPUS® GL-M 7000 DES So 435 R EA B24 P is designed for handling large-sized glass panes and window elements up to a maximum weight of 7,000 kg. It is equipped with a dual-circuit vacuum system for construction site use according to DIN EN 13155. The crane eye of the device allows attaching the device to an existing hoist (provided by the customer). The device is equipped with a suction frame for the installation of large-sized glass façade elements up to 7,000 kg and with a special suction frame for the installation of vertical glass fins up to 1,600 kg.

The suction frames can hydraulically be rotated endless by 360° and tilted by 90°. A counterweight balancer with electrically driven counterweights serves for balancing the load. The operating and display elements are arranged ergonomically and allow comfortably positioning and moving the load. The electrically operated vacuum pump is supplied with energy by a 24 V DC battery system. Deviations from the nominal condition are indicated by optical and acoustical warning devices. Even in the case of complete energy breakdown, vacuum remains in each suction pad for at least 5 minutes. In this way a secure lowering of the load can be ensured at all times.

Working Load Limit

Device / Suction pads	maximum Working Load Limit
16 suction pads Ø 400 mm	up to 1,600 kg with suction frame type 2
70 suction pads Ø 400 mm	up to 7,000 kg with suction frame type 1

Application data

Weight	with suction frame type 1 and counterweight balancer ca. 3,900 kg with suction frame type 2 and counterweight balancer ca. 3,150 kg
Suction pads	70 pcs. Ø 400 mm
Suction frame type 1	basic version 4.4 m x 1.8 m with up to 28 suction pads; Working Load Limit 2,800 kg full version 10.5 m x 1.8 m with up to 70 suction pads; Working Load Limit 7,000 kg
Suction frame type 2	consists of 2 hydraulically folding wings with up to 16 suction pads; Working Load Limit 1,600 kg for handling glass fins
Vacuum generation	electrical vacuum pump
Operation	cable remote control
Vacuum system	dual-circuit vacuum system for construction site use
Nominal pressure pneumatic system	-0.65 bar to -0.73 bar
Power supply	24 V DC battery system
Optional equipment	blow-off function radio remote control
Equipment	- technical documentation - built-in battery charger - transport rack
Movements
Lifting and lowering	by the crane hook
Rotating horizontally	in the crane hook, manually 360°
Rotation of the suction frame	hydraulically 360° endless
Tilting the suction frame	hydraulically 90°